Fix Computer shuts down when USB device is plugged in: If you PC shutdowns randomly when a USB device is connected then you are at the right place as today we are going to discuss on how to fix this issue. In some cases, computer shut down or restarts whenever the user plug in a USB device, so it really depends on user system configuration. Now there is no information about this information and it’s difficult to conclude any cause from here so we are going to troubleshoot various issues which are related to this problem.
Although there isn’t much information available there are quite a few known cause such as if the USB device requires power greater than what the PSU can supply to that device then the system will run out resources and lock up or power off your computer in order to prevent system damage. Another issue is if there is a hardware related problem in the USB device or if it has a short then the system will definitely shut down. Sometimes the problem is only related to USB port so make sure to check another USB device in order to verify if the issue is related to it or not.
Now that you have known about the issues and various causes it’s time to see how to resolve the issue. So without wasting any time let’s see how to actually Fix Computer shuts down when USB device is plugged in issue with the help of below-listed troubleshooting guide.
- Fix Computer shuts down when USB device is plugged in
- Method 1: Reinstall USB Drivers
- Method 2: Run USB Troubleshooter
- Method 3: Run System Restore
- Method 4: Check Connected Devices
- Method 5: Disable USB Ports
- Method 6: Change Power Supply Unit (PSU)
Fix Computer shuts down when USB device is plugged in
Make sure to create a restore point just in case something goes wrong.
Method 1: Reinstall USB Drivers
1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.
2.Expand Universal Serial Bus controllers then right-click on each of the listed devices and select Uninstall.
3.Now click on View then select Show hidden devices.
4.Again expand Universal Serial Bus controllers and then uninstall each of the hidden devices.
5.Similarly, expand Storage volumes and uninstall each of the hidden devices.
6.Restart your PC and your system will automatically install the USB drivers.
Method 2: Run USB Troubleshooter
1.Open your web browser and enter the following URL (or click on the below link):
https://support.microsoft.com/en-in/help/17614/automatically-diagnose-and-fix-windows-usb-problems
2.When the page has finished loading, scroll down and click Download.
3.Once the file is downloaded, double-click the file to open the Windows USB troubleshooter.
4.Click next and let Windows USB Troubleshooter run.
5.IF you have any attached devices then USB Troubleshooter will ask for confirmation to eject them.
6.Check the USB device connected to your PC and click Next.
7.If the problem is found, click on Apply this fix.
8.Restart your PC and see if you’re able to Fix Computer shuts down when USB device is plugged in issue.
Method 3: Run System Restore
1.Press Windows Key + R and type” sysdm.cpl ” then hit enter.
2.Select System Protection tab and choose System Restore.
3.Click Next and choose the desired System Restore point .
4.Follow the on-screen instruction to complete system restore.
5.After reboot, you may be able to Fix Computer shuts down when USB device is plugged in.
Method 4: Check Connected Devices
If the connected USB devices consume too much power then it may also lead to system crash. In order to verify if the device is faulty or not, make sure to connect the device to another PC. If the device doesn’t work then the device is definitely faulty.
Method 5: Disable USB Ports
1.Press Windows Key + R then type devmgmt.msc and hit Enter.
2.Expand Universal Serial Bus controllers then right click on USB drivers and select Disable.
Note: Possible the driver will be something like this: Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller – 1E2D.
3.Again right-click on it and select Enable.
3.Reboot your PC to save changes and see if you’re able to Fix Computer shuts down when USB device is plugged in.
Method 6: Change Power Supply Unit (PSU)
Well, if nothing helps then you can be sure that the issue is with your PSU. In order to fix the issue, you need to change your computer power supply unit. It’s advised you consider the help of a proper technician in order to replace your PSU unit.
- Fix Windows could not start the Print Spooler service on local computer
- Fix PAGE_FAULT_IN_NONPAGED_AREA Error
- How To Fix KERNEL_DATA_INPAGE_ERROR
- Fix CRITICAL_STRUCTURE_CORRUPTION Error
That’s it you have successfully Fix Computer shuts down when USB device is plugged in but if you still have any question regarding this post feel free to ask them in the comment’s section.
Fix Windows could not start the Print Spooler service on local computer: If you are unable to print and receives the above error message then you are at the right place as today we are going to discuss on how to resolve this error message. The error clearly states that the Print Spooler service cannot be started, so what does this print spooler do? Well, all the printing related jobs are managed by a Windows service called Print Spooler. The print spooler helps your Windows to interact with the printer, and orders the print jobs in your queue. If the Print Spooler service fails to start you will receive the following error message:
Windows could not start the Print Spooler service on Local Computer. Error 1068: The dependency service or group failed to start.
The above error message is only displayed when you try to start Print Spooler services in services.msc window. So without wasting any time let’s see how to actually Fix Windows could not start the Print Spooler service on local computer error with the help of below-listed troubleshooting guide.
- Fix Windows could not start the Print Spooler service on local computer
- Method 1: Run Printer Troubleshooter
- Method 2: Registry Fix
- Method 3: Start Print Spooler Services
- Method 4: Run CCleaner and Malwarebytes
- Method 5: Delete all the files in PRINTERS folder
- Method 6: Run System File Checker (SFC) and Check Disk (CHKDSK)
- Method 7: Uncheck Allow service to interact with desktop
Fix Windows could not start the Print Spooler service on local computer
Make sure to create a restore point just in case something goes wrong.
Method 1: Run Printer Troubleshooter
1.type “troubleshooting” in Windows Search bar and click on Troubleshooting.
6.Next, from the left window pane select View all.
7.Then from the Troubleshoot computer problems list select Printer.
8.Follow on-screen instruction and let the Printer Troubleshooter run.
9.Restart your PC and you may be able to Fix Windows could not start the Print Spooler service on local computer.
Method 2: Registry Fix
1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.
2.Navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler
3.Make sure to highlight Spooler key in the left window pane and then in the right window pane find the string called DependOnService.
4.Double click on the DependOnService string and change its value by deleting HTTP part and just leaving the RPCSS part.
5.Click OK to save changes and close Registry Editor.
6.Reboot your PC and see if the error is resolved or not.
Method 3: Start Print Spooler Services
1.Press Windows Key + R then type services.msc and hit Enter.
2.Find Print Spooler service in the list and double-click on it.
3.Make sure the Startup type is set to Automatic and the service is running, then click on Stop and then again click on start in order to restart the service.
4.Click Apply followed by OK.
5.After that, again try to add the printer and see if you’re able to Fix Windows could not start the Print Spooler service on local computer.
Method 4: Run CCleaner and Malwarebytes
1.Download and install CCleaner & Malwarebytes.
- Run Malwarebytes and let it scan your system for harmful files.
3.If malware is found it will automatically remove them.
4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:
5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.
6.To clean your system further select the Registry tab and ensure the following are checked:
7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.
8.When CCleaner asks “ Do you want backup changes to the registry? ” select Yes.
9.Once your backup has completed, select Fix All Selected Issues.
10.Restart your PC to save changes. This would Fix Windows could not start the Print Spooler service on local computer error but if it didn’t, then run Adwcleaner and HitmanPro.
Method 5: Delete all the files in PRINTERS folder
1.Press Windows Key + R then type services.msc and hit Enter.
2.Find Print Spooler service then right-click on it and select Stop.
3.Now in the File Explorer navigate to the following folder:
C:\Windows\system32\spool\PRINTERS
Note: It will ask to continue then click on it.
- Delete all the files in PRINTERS folder (Not the folder itself) and then close everything.
5.Again go to services.msc window and s tart Print Spooler service.
6.Reboot your PC and see if you are able to Fix Windows could not start the Print Spooler service on local computer.
Method 6:Run System File Checker (SFC) and Check Disk (CHKDSK)
1.Press Windows Key + X then click on Command Prompt(Admin).
2.Now type the following in the cmd and hit enter:
Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
3.Wait for the above process to finish and once done restart your PC.
4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK) .
5.Let the above process complete and again reboot your PC to save changes.
Method 7: Uncheck Allow service to interact with desktop
1.Press Windows Key + R then type services.msc and hit Enter.
2.Find Print Spooler service in the list then right-click on it and select Properties.
3.Switch to Log On tab and uncheck “ Allow service to interact with desktop. “
4.Click Apply and then go back to the General tab and start the service.
4.Again click Apply followed by OK.
5.Reboot your PC to save changes.
- Fix Brightness issues after Windows 10 Creators Update
- Fix Windows 10 Mail Error 0x80040154 or 0x80c8043e
- How To Fix Print Spooler Error 0x800706b9
- Fix Windows 10 Creator Update fails to install
That’s it you have successfully Fix Windows could not start the Print Spooler service on local computer but if you still have any queries regarding this post feel free to ask them in the comment’s section.
