If you are facing Blue Screen of Death (BSOD) CRITICAL_STRUCTURE_CORRUPTION Error, then you can safely assume that it is caused because of corrupted, incompatible or outdated drivers. If you have recently upgraded to Windows 10, then the chances are you are more prone to this error as the old drivers might have become incompatible with the new version of Windows. So without wasting any time let’s see how to actually Fix CRITICAL_STRUCTURE_CORRUPTION Error with the help of below-listed troubleshooting guide.
- Fix CRITICAL_STRUCTURE_CORRUPTION Error
- Method 1: Check System Log in Event Viewer
- Method 2: Run SFC and CHKDSK
- Method 3: Run DISM
- Method 4: Perform a Clean Boot
- Method 5: Run Driver Verifier
- Method 6: Run Windows Memory Diagnostic
- Method 7: Update BIOS
- Method 8: Update Drivers
Fix CRITICAL_STRUCTURE_CORRUPTION Error
Make sure to create a restore point just in case something goes wrong.
Method 1: Check System Log in Event Viewer
Press Windows Key + R then type eventvwr.msc and hit Enter to open Event Viewer.
Now navigate to the following path: Windows Logs > System. Wait for a few seconds for Windows to load the necessary records. Now under System, look for anything suspicious which might have to cause the BSOD CRITICAL_STRUCTURE_CORRUPTION Error. Check if a certain program is a culprit, is so uninstalling that particular program from your system.
Method 2: Run SFC and CHKDSK
- Open Command Prompt . The user can perform this step by searching for ‘cmd’ and then press Enter.
- Now type the following in the cmd and hit enter:
Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
Wait for the above process to finish and once done restart your PC.
Next, run CHKDSK to Fix File System Errors .
Let the above process complete and again reboot your PC to save changes.
Method 3: Run DISM
Open Command Prompt . The user can perform this step by searching for ‘cmd’ and then press Enter.
Now type the following in the cmd and hit enter after each one:
Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth
Let the DISM command run and wait for it to finish.
If the above command doesn’t work, then try on the below:
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess
Note: Replace the C:\RepairSource\Windows with your repair source (Windows Installation or Recovery Disc).
- Reboot your PC to save changes and see if you’re able to Fix CRITICAL_STRUCTURE_CORRUPTION Error.
Method 4: Perform a Clean Boot
Sometimes 3rd party software can conflict with Windows and can cause Blue Screen of Death error. To Fix CRITICAL_STRUCTURE_CORRUPTION Error, you need to perform a clean boot in your PC and diagnose the issue step by step.
Method 5: Run Driver Verifier
This method is only useful if you can log into your Windows normally not in the safe mode. Next, make sure to create a System Restore point.
Run Driver Verifier in order Fix CRITICAL_STRUCTURE_CORRUPTION Error. This would eliminate any conflicting driver issues due which this error can occur.
Method 6: Run Windows Memory Diagnostic
Type memory in the Windows search bar and select “ Windows Memory Diagnostic. ”
In the set of options displayed select “ Restart now and check for problems. ”
After which Windows will restart to check for possible RAM errors and will hopefully display the possible reasons as for why you get the Blue Screen of Death (BSOD) error message.
Reboot your PC to save changes.
Method 7: Update BIOS
Sometimes updating your system BIOS can fix this error. To update your BIOS go to your motherboard manufacturer website and download the latest BIOS version and install it.
If you have tried everything but still stuck at USB device not recognized problem, see this guide: How to Fix USB Device not recognized by Windows .
Method 8: Update Drivers
Make sure Windows is up to date, and all the device drivers are also updated. If not, then open Device Manager and manually update each & every device drivers. Alternatively, you can download the latest drivers for the device from their manufacturer’s website.
Recommended:
- Fix Brightness issues after Windows 10 Creators Update
- Fix Windows could not start the Print Spooler service on local computer
- How To Fix Print Spooler Error 0x800706b9
- Fix Windows 10 Creator Update fails to install
That’s it you have successfully Fix CRITICAL_STRUCTURE_CORRUPTION Blue Screen of Death error but if you still have any questions regarding this post feel free to ask them in the comment’s section.
Fix Windows could not start the Print Spooler service on local computer: If you are unable to print and receives the above error message then you are at the right place as today we are going to discuss on how to resolve this error message. The error clearly states that the Print Spooler service cannot be started, so what does this print spooler do? Well, all the printing related jobs are managed by a Windows service called Print Spooler. The print spooler helps your Windows to interact with the printer, and orders the print jobs in your queue. If the Print Spooler service fails to start you will receive the following error message:
Windows could not start the Print Spooler service on Local Computer. Error 1068: The dependency service or group failed to start.
The above error message is only displayed when you try to start Print Spooler services in services.msc window. So without wasting any time let’s see how to actually Fix Windows could not start the Print Spooler service on local computer error with the help of below-listed troubleshooting guide.
- Fix Windows could not start the Print Spooler service on local computer
- Method 1: Run Printer Troubleshooter
- Method 2: Registry Fix
- Method 3: Start Print Spooler Services
- Method 4: Run CCleaner and Malwarebytes
- Method 5: Delete all the files in PRINTERS folder
- Method 6: Run System File Checker (SFC) and Check Disk (CHKDSK)
- Method 7: Uncheck Allow service to interact with desktop
Fix Windows could not start the Print Spooler service on local computer
Make sure to create a restore point just in case something goes wrong.
Method 1: Run Printer Troubleshooter
1.type “troubleshooting” in Windows Search bar and click on Troubleshooting.
6.Next, from the left window pane select View all.
7.Then from the Troubleshoot computer problems list select Printer.
8.Follow on-screen instruction and let the Printer Troubleshooter run.
9.Restart your PC and you may be able to Fix Windows could not start the Print Spooler service on local computer.
Method 2: Registry Fix
1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.
2.Navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler
3.Make sure to highlight Spooler key in the left window pane and then in the right window pane find the string called DependOnService.
4.Double click on the DependOnService string and change its value by deleting HTTP part and just leaving the RPCSS part.
5.Click OK to save changes and close Registry Editor.
6.Reboot your PC and see if the error is resolved or not.
Method 3: Start Print Spooler Services
1.Press Windows Key + R then type services.msc and hit Enter.
2.Find Print Spooler service in the list and double-click on it.
3.Make sure the Startup type is set to Automatic and the service is running, then click on Stop and then again click on start in order to restart the service.
4.Click Apply followed by OK.
5.After that, again try to add the printer and see if you’re able to Fix Windows could not start the Print Spooler service on local computer.
Method 4: Run CCleaner and Malwarebytes
1.Download and install CCleaner & Malwarebytes.
- Run Malwarebytes and let it scan your system for harmful files.
3.If malware is found it will automatically remove them.
4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:
5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.
6.To clean your system further select the Registry tab and ensure the following are checked:
7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.
8.When CCleaner asks “ Do you want backup changes to the registry? ” select Yes.
9.Once your backup has completed, select Fix All Selected Issues.
10.Restart your PC to save changes. This would Fix Windows could not start the Print Spooler service on local computer error but if it didn’t, then run Adwcleaner and HitmanPro.
Method 5: Delete all the files in PRINTERS folder
1.Press Windows Key + R then type services.msc and hit Enter.
2.Find Print Spooler service then right-click on it and select Stop.
3.Now in the File Explorer navigate to the following folder:
C:\Windows\system32\spool\PRINTERS
Note: It will ask to continue then click on it.
- Delete all the files in PRINTERS folder (Not the folder itself) and then close everything.
5.Again go to services.msc window and s tart Print Spooler service.
6.Reboot your PC and see if you are able to Fix Windows could not start the Print Spooler service on local computer.
Method 6:Run System File Checker (SFC) and Check Disk (CHKDSK)
1.Press Windows Key + X then click on Command Prompt(Admin).
2.Now type the following in the cmd and hit enter:
Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
3.Wait for the above process to finish and once done restart your PC.
4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK) .
5.Let the above process complete and again reboot your PC to save changes.
Method 7: Uncheck Allow service to interact with desktop
1.Press Windows Key + R then type services.msc and hit Enter.
2.Find Print Spooler service in the list then right-click on it and select Properties.
3.Switch to Log On tab and uncheck “ Allow service to interact with desktop. “
4.Click Apply and then go back to the General tab and start the service.
4.Again click Apply followed by OK.
5.Reboot your PC to save changes.
- Fix Brightness issues after Windows 10 Creators Update
- Fix Windows 10 Mail Error 0x80040154 or 0x80c8043e
- How To Fix Print Spooler Error 0x800706b9
- Fix Windows 10 Creator Update fails to install
That’s it you have successfully Fix Windows could not start the Print Spooler service on local computer but if you still have any queries regarding this post feel free to ask them in the comment’s section.
If you have issues with your Printer, then it must be because of Windows 10 unable to communicate with Print Spooler. The Print Spooler is a Windows program responsible for managing all the print jobs associated with your Printer. Only with the help of print spooler, you can initiate prints, scans, etc. from your Printer. Now users are unable to use their printers and when they go to services.msc window to start Print Spooler services they face the following error message:
Windows could not start the Print Spooler service on Local Computer.
Error 0x800706b9: Not enough resources are available to complete this operation.
Now you know all about the error, it’s time we should see how to fix this annoying issue. So without wasting any time let’s see how to Fix Print Spooler Error 0x800706b9 with the help of below-listed troubleshooting guide.
- Fix Print Spooler Error 0x800706b9
- Method 1: Run Printer Troubleshooter
- Method 2: Start Print Spooler Services
- Method 3: Run CCleaner and Malwarebytes
- Method 4: Registry Fix
- Method 5: Delete all the files in PRINTERS folder
- Method 6: Create a New User Account
Fix Print Spooler Error 0x800706b9
Make sure to create a restore point just in case something goes wrong.
Method 1: Run Printer Troubleshooter
- Open Control Panel and search Troubleshooting in the Search Bar on the top right side and click on Troubleshooting.
Next, from the left window, pane select View all.
Then, from the Troubleshoot computer problems list select Printer.
Follow on-screen instruction and let the Printer Troubleshooter run.
Restart your PC, and you may be able to Fix Print Spooler Error 0x800706b9.
Method 2: Start Print Spooler Services
- Press Windows Key + R then type services.msc and hit Enter.
Find Print Spooler service in the list and double-click on it.
Make sure the Startup type is set to Automatic, and the service is running, then click on Stop and then again click on start to restart the service.
Click Apply, followed by OK.
After that, again try to add the printer and see if you’re able to Fix Print Spooler Error 0x800706b9.
Method 3: Run CCleaner and Malwarebytes
Download and install CCleaner & Malwarebytes.
Run Malwarebytes and let it scan your system for harmful files. If malware is found, it will automatically remove them.
Now run CCleaner and select Custom Clean .
Under Custom Clean, select the Windows tab then make sure to checkmark defaults and click Analyze .
- Once Analyze is complete, make sure you’re certain to remove the files to be deleted.
Finally, click on the Run Cleaner button and let CCleaner run its course.
To further clean your system, select the Registry tab , and ensure the following are checked:
- Click on the Scan for Issues button and allow CCleaner to scan, then click on the Fix Selected Issues button.
When CCleaner asks “ Do you want backup changes to the registry? ” select Yes .
Once your backup has completed, click on the Fix All Selected Issues button.
Restart your PC to save changes.
Method 4: Registry Fix
- Press Windows Key + R then type regedit and hit Enter to open Registry Editor.
- Navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler
- Make sure to highlight Spooler key in the left window pane and then in the right window pane find the string called DependOnService.
- Double click on the DependOnService string and change its value by deleting the HTTP part and leaving the RPCSS part.
Click OK to save changes and close Registry Editor.
Reboot your PC and see if the error is resolved or not.
Method 5: Delete all the files in PRINTERS folder
- Press Windows Key + R then type services.msc and hit Enter.
- Find Print Spooler service then right-click on it and select Stop.
- Now in the File Explorer navigate to the following folder:
C:\Windows\system32\spool\PRINTERS
Note: It will ask to continue then click on it.
Delete all the files in PRINTERS folder (Not the folder itself) and then close everything.
Again go to services.msc window and s tart Print Spooler service.
- Reboot your PC and see if you can Fix Print Spooler Error 0x800706b9.
Method 6: Create a New User Account
- Press Windows Key + I to open Settings and then click Accounts.
2.Click on Family & other people tab in the left-hand menu and click Add someone else to this PC under Other people.
- Click, I don’t have this person’s sign-in information in the bottom.
- Select Add a user without a Microsoft account in the bottom.
- Now type the username and password for the new account and click Next.
Sign in to this new user account and see if the Printer is working or not. If you are successfully able to Fix Print Spooler Error 0x800706b9 in this new user account, then the problem was with your old user account which might have got corrupted, anyway transfer your files to this account and delete the old account to complete the transition to this new account.
Recommended:
- Fix Can’t turn on Windows Firewall Error code 0x80070422
- How To Fix Windows 10 Mail Error 0x80040154 or 0x80c8043e
- Fix Something Went Wrong While Syncing Mail App In Windows 10
- Fix There was a Problem Sending the Command to the Program
That’s it you have successfully Fix Print Spooler Error 0x800706b9 but if you still have any questions regarding this post feel free to ask them in the comment’s section.
